Basic settings
5.11
Initial value change list
Displays and sets the parameters changed from the initial value.
NOTES
Calibration parameters (C0 (Pr. 900) to C7 (Pr. 905), C42 (Pr. 934) to C45 (Pr. 935)) are not
displayed even they are changed from the initial settings.
Only simple mode parameter is displayed when simple mode is set (Pr. 160 = 9999 (initial
value, displays only the simple mode parameters)).
Only user group is displayed when user group is set (Pr. 160 = "1").
Pr. 160 is displayed independent of whether the setting value is changed or not.
FR-F700 EC
Initial value change list
5 - 19