Parameter List With Instruction Codes - Mitsubishi Electric FR-F740 EC Instruction Manual

Parameter list with instruction codes

A.6 Parameter list with instruction codes
In the initial setting, only the simple mode parameters are displayed.
Set Pr. 160 "User group read selection" as required.
Parameter Name
160
Tab. A-7:Settings of parameter 160
NOTES The parameters marked
The parameters marked with
ration even if "0" (initial value) is set in Pr. 77 "Parameter write selection".
Parameters for the option are displayed only when the option unit is installed.
The instruction codes (hexadecimal) for "read" and "write" on the right of the parameter
number are those used to set the parameter via communication. "Extended" indicates the
setting of the extended link parameter. (Refer to section 6.18 for communication.) The data
code is contained in the table columns to the right next to the parameter number.
Function Parameter
Read
0 00
1 01
2 02
3 03
4 04
Basic
5 05
functions
6 06
7 07
8 08
9 09
Tab. A-8: Parameter list with instruction codes (1)
A - 22
User group read selection
are the simple mode parameters.
Instruction Code
Name
Write Extended
80 0 Torque boost
81 0 Maximum frequency
82 0 Minimum frequency
83 0 Base frequency
Multi-speed setting
84 0
(high speed)
Multi-speed setting
85 0
(middle speed)
Multi-speed setting
86 0
(low speed)
87 0 Acceleration time
88 0 Deceleration time
Electronic thermal O/L
89 0
relay
Initial Setting
Remarks
Value Range
Only the simple mode parameters can be
9999
displayed.
Simple mode and extended mode
9999 0
parameters can be displayed.
Only parameters registered in the user
1
group can be displayed.
in the table allow its setting to be changed during ope-
Minimum
Setting
Setting In-
Range
crements
0–30% 0.1%
0–120Hz 0.01Hz
0–120Hz 0.01Hz
0–400Hz 0.01Hz
0–400Hz 0.01Hz
0–400Hz 0.01Hz
0–400Hz 0.01Hz
0–3600/360s 0.1/0.01s
0–3600/360s 0.1/0.01s
0–500/
0.01/0.1A
0–3600A
Appendix
Refer to Customer
Initial Value
Page Setting
6/4/3/2/1.5/
6-39
1%
120/60Hz 6-54
0Hz 6-54
50Hz 6-58
50Hz 6-63
30Hz 6-63
10Hz 6-63
5s/15s 6-75
10s/30s 6-75
Rated
inverter 6-85
current