Wiring
3.7.5
Connection of power regeneration converter (MT-RC) (01800 or more)
When connecting a power regeneration converter (MT-RC), perform wiring securely as shown
below.
CAUTION:
E
Perform wiring of the power regeneration converter (MT-RC) securely as shown below.
Incorrect connection will damage the power regeneration converter and inverter.
After connecting securely, set "1" in Pr. 30 "Regenerative function selection" and "0" in Pr. 70
"Special regenerative brake duty".
Fig. 3-33: Connection of the power regeneration converter MT-RC
NOTE
Refer to the MT-RC manual for precautions for connecting the power coordination reactor
and others.
FR-F700 EC
3-phase AC
power supply
Connection of stand-alone option units
Inverter
Reset signal
Alarm signal
Ready signal
I001352E
3 - 41