Setting Multiple Parameters As A Batch (Pr. 999) - Mitsubishi Electric FR-F740 EC Instruction Manual

Useful functions
6.21.7

Setting multiple parameters as a batch (Pr. 999)

Parameter settings are changed as a batch. Those include parameter settings for the extended
PID display, the Mitsubishi human machine interface (GOT) connection, rated frequency set-
tings of 50Hz/60Hz, and acceleration/deceleration time increment settings.
Multiple parameters are changed automatically. Users do not have to consider each parameter
number. (Parameter setting mode)
Pr. No. Name
Automatic parameter
999
setting
The read value is always "9999".
Automatic parameter setting (Pr. 999)
Select which parameters to be automatically set, and set that to Pr. 999. Multiple parameter set-
tings are changed automatically. Refer to page 6-405 for the list of parameters that are changed
automatically.
Pr. 999
setting
1
2
10
11
20
21
30
31
Tab. 6-130: Pr. 999 settings
NOTE
If the automatic setting is performed, the selected settings including the changed parameter
settings will be changed.
6 - 402
Initial Setting
Description
Value Range
1 Normal PID setting
2 Extended PID setting
10 GOT initial setting (PU connector)
GOT initial setting
11
(RS485 terminals)
20 50Hz rated frequency
9999
21 60Hz rated frequency
Acceleration/deceleration time
30
(0.1 s increment)
Acceleration/deceleration time
31
(0.01 s increment)
9999 No function
Description
Automatically applies the normal PID display settings in
parameters
Automatically applies the extended PID display settings
in parameters
Automatically sets the communication parameters for
the GOT connection with a PU connector
Automatically sets the communication parameters for
the GOT connection with RS485 terminals
Sets the related parameters
50Hz rated frequency
of the rated frequency
according to the power
60Hz rated frequency
supply frequency
Changes the setting incre-
0.1 s increment
ments of acceleration/
deceleration time parame-
ters without changing
0.01 s increment
acceleration/deceleration
settings
Parameters referred to
—
Operation in the parameter setting mode
(AUTO) → (PID) → Write "1"
(AUTO) → (PID) → Write "2"
(AUTO) → (GOT) → Write "1"
(AUTO) → (GOT) → Write "2"
(AUTO) → (F50) → Write "1"
(AUTO) → (F60) → Write "1"
(AUTO) → (T0.1) → Write "1"
(AUTO) → (T0.01) → Write "1"
Parameter
Refer to
Section