Mitsubishi Electric FR-F740 EC Instruction Manual page 44

Terminal connection diagram
NOTES
To prevent a malfunction due to noise, keep the signal cables more than 10cm away from
the power cables.
After wiring, wire offcuts must not be left in the inverter.
Wire offcuts can cause an alarm, failure or malfunction. Always keep the inverter clean.
When drilling mounting holes in an enclosure etc., take care not to allow chips and other for-
eign matter to enter the inverter.
Set the voltage/current input switch correctly. Operation with a wrong setting may cause a
fault, failure or malfunction.
3 - 6
Wiring