Connecting The Operation Panel/Parameter Unit Using A Connection Cable - Mitsubishi Electric FR-F740 EC Instruction Manual

Connecting the operation panel/parameter unit using a connection cable

3.5 Connecting the operation panel/parameter unit using a
connection cable
With a connection cable (FR-A5CBL), you can connect the operation panel (FR-DU07) or the
parameter unit (FR-PU07) to the inverter. For mounting the operation panel (FR-DU07), the op-
tional connector (FR-ADP) is required. This remote connection with the inverter makes it pos-
sible to mount the operation panel/parameter unit on the enclosure surface and operate the in-
ternal frequency inverter from there.
Securely insert one end of connection cable until the stoppers are fixed.
Fig. 3-22: Connecting the operation panel/parameter unit using a connection cable
NOTES Overall wiring length when the operation panel is connected: 20m.
Using the PU connector, the frequency inverter can be connected to a RS485 interface of a
personal computer, etc. (refer to section 6.18).
3 - 30
Parameter unit
FR-PU07
Operation panel
FR-DU07
Connection cable
FR-A5 CBL
Operation panel connection connector
FR-ADP (option)
Wiring
I001032E_F