Free Parameters (Pr. 888, Pr. 889) - Mitsubishi Electric FR-F740 EC Instruction Manual

Parameter
6.21.5

Free parameters (Pr. 888, Pr. 889)

Parameters you can use for your own purposes.
You can input any number within the setting range "0" to "9999".
For example, the number can be used:
● As a unit number when multiple units are used.
● As a pattern number for each operation application when multiple units are used.
● As the year and month of introduction or inspection.
Pr. No. Name
888
Free parameter 1
889
Free parameter 2
The above parameters can be set when Pr. 160 = 0.
The above parameters allow its setting to be changed during operation in any operation mode
even if "0" (initial value) is set in Pr. 77 "Parameter write selection".
NOTE Pr. 888 and Pr. 889 do not influence the inverter operation.
FR-F700 EC
Initial Setting
Description
Value Range
9999 0–9999
Desired values can be input. Data is
held even if the inverter power is
turned off.
9999 0–9999
Useful functions
Parameters referred to
—
Refer to
Section
6 - 399