Mitsubishi Electric FR-F740 EC Instruction Manual page 132

Simple mode parameter list
Pr. Name
Energy saving control
60
selection
Operation mode
79
selection
Terminal 2 frequency
125
setting gain frequency
Terminal 4 frequency
126
setting gain frequency
User group read
160
selection
PID display bias
C42
(934)
coefficient
C43
PID display bias value
(934)
PID display gain
C44
(935)
coefficient
C45
PID display gain value
(935)
Automatic parameter
999
setting
Tab. 5-2: Simple mode parameters (2)
NOTE
The parameter number in parentheses is the one for use with the parameter unit (FR-PU04/
FR-PU07).
5 - 2
Incre- Initial
Range
ments value
1 0 0/4/9
1 0 0/1/2/3/4/6/7
0.01Hz 50Hz 0–400Hz
0.01Hz 50Hz 0–400Hz
1 9999 0/1/9999
0–500.00/
0.01 9999
9999
0.1% 20% 0–300.0%
0.01 9999 0–500.00
0.1% 100% 0–300.0%
1/2/10/11/20/
1 9999 21/30/31/
9999
Basic settings
Description
The inverter output voltage is mini-
mized when using for fan and
pump applications.
Select the start command location
and frequency command location.
Frequency for the maximum value
of the potentiometer (at 5V) can be
changed.
Frequency at 20mA input can be
changed.
Make extended parameters valid
Set the coefficient on bias (mini-
mum) side of terminal 4 input.
9999: Displayed in %.
Set the converted % on bias (mini-
mum) side current /voltage of ter-
minal 4 input.
Set the coefficient on gain (maxi-
mum) side of the terminal 4 input.
9999: Displayed in %.
Set the converted % on gain (max-
imum) side of current/voltage of
terminal 4 input.
Multiple parameters are changed
automatically. Various parameter
settings are changed as a batch.
Refer
to
page
5-10
5-12
4-35
4-38
6-221
6-346
6-346
6-346
6-346
6-402