Nexus 220 Tab; Amanonet Tab - Amano Time Guardian Series Installation And User Manual

To assign a Cost and/or Billable Rate, click on the Add button and a row will appear in the
Rates box. In the Date field, enter a date when the rate for the employee will be in effect. Enter
a rate for the employee in the Rate field. Rate is the employee's actual rate. Percentage will
increase the existing rate for the employee by the percentage on the date as defined in Rate
Setup. Rates can be increased using the Operation field or by clicking on the Percent Increase
button and the following window will appear:
Click on the button to enter an effective date for the increase and enter the percentage
you wish to increase the rate. Click on the
created in the Rates box.
To delete a rate or rate operation, select the desired row, and click on the Delete button.
Note: Creating Cost rates can also be done with Global Assign
list (see Global Apply).

Nexus 220 Tab

Access Control module must be activated for this feature. Use to setup access control
integration with PIN numbers and/or tags for each employee. See Access Control Integration
Module for details on the setup/configuration and use of the
Nexus 220 system with the Amano Time & Attendance software.

AmanoNet Tab

Access Control module must be activated for this feature. Use to setup access control
integration with PIN numbers and/or tags for each employee. See Access Control Integration
Module for details on the setup/configuration and use of the AmanoNet system with the Amano
Time & Attendance software.
5-8
button when finished and a new row will be
– Employee Administration
Time Guardian Series
from the main employee