Amano Time Guardian Series Installation And User Manual page 376

15. Click on the Done button to finish the initial Nexus Lite Management (NLM) software
installation and restart your system.
16. The Amano Software Activation (ASA) screen will appear after the initial software installation
(see Figure). Enter the 9-digit Serial Number supplied on the Amano software CD and click
on the Activate
has been activated. Proceed to product
register).
However, if you choose not to activate the software by canceling the ASA procedure the
following error message will appear. At this point you have a trial period of up to 14-days to
use the software. Click the OK button to launch the software and continue using the Nexus
Lite Management (NLM) software under the trial period.
Note – If the Activation error dialog appears, e.g., the serial number is incorrect, or the
same serial number was previously installed. At this point contact Amano customer
support at 1-800-896-7035.
17. Upon successful activation the registration screen will appear. Perform on-line registration
by entering the appropriate information in the Product Registration fields
messages will appear alongside incomplete
the registration to ensure notification of all important software updates, etc.
23-6
button. Upon successful activation the dialog
registration" dialog will appear (skipping to
fields]. Amano recommends you complete
Time Guardian Series
"Your Software
[red error
– Nexus Lite Module