Clock Setup Wizard; Employees Amanonet; Do You Have Terminal(S) Other Than Access Control Terminal(S)? - Amano Time Guardian Series Installation And User Manual

Employees AmanoNet

This is part of an optional Access Control Module which requires activation to utilize. Use to
setup access control integration with PIN numbers and/or tags for each employee. See the
Access Control Integration section for additional configuration information.
After completing the entry/selection of information for
Next button to continue to
Step 8: Clock Setup Wizard [Optional]
Note: Prior to commencing this step, it is recommended you install your terminal, using the
appropriate terminal installation guide. The terminal is installed to communicate with the
host PC. The installation guide will provide the necessary steps to install the terminal.
You may need to obtain the IP address for each Ethernet terminal(s) connected to the
system.
Step 8: Clock Setup
•
The company doesn't have access system
•
The company doesn't want the Time Attendance System to be integrated with Access
Control System.
•
The company has an access system, but wants to use a different device(s) for Time
Attendance.

Do you have Terminal(s) other than Access Control Terminal(s)?

If Yes, the Time & Attendance software will automatically poll and upload punches from
connected terminals each time the software is opened.
– Setup Wizard
Time Guardian Series
Step 8: Terminal
is optional; use this step only if:
Step 7: Employee
Setup.
Setup, click on the
3-45