Amano Time Guardian Series Installation And User Manual page 204

9. In the Count table, check the Pay Codes in each column that you want to be combined to
achieve each level's threshold. For example, if you checked REG and HOL in the Level 1
column, then the hours for REG and HOL Pay Codes will be combined to reach Level 1's
threshold value.
Note: You can select all the Pay Codes in a given column by clicking on the column heading.
You can also deselect any checked Pay Codes in a column by clicking on the column
heading. Also, you can select/unselect all the Pay Codes by clicking on the
Check/Uncheck All
10. Click on the After Shift tab.
11. In the Level table, enter the threshold limits and assign a Pay Code to each level of
overtime.
12. Click on the Count tab.
11-10
icon.
Time Guardian Series
– Advanced Overtime Module