Amano Time Guardian Series Installation And User Manual page 190

3. Using the drop down list, select for the Shift Auto Punch Out based on; none, Schedule End,
or Last In-Punch. The following two scenarios can be used to understand how this selection
affects punching in and out. For Scenario 1 - if Schedule End is selected for an employee
that has a schedule = 8:00am - 5:00pm. If the actual last In-Punch was 8:20 and the minutes
from was set for 120 minutes. [2 hours], then the employee would be automatically punched
out at 7:00pm. Note - the employee must have a Template Schedule or Individual
Schedule already defined for this to work, or else it will be ignored. For Scenario 2 - if
Last In-Punch is selected for an employee that has a schedule = 8:00am - 5:00pm. If the
Last In-Punch was 08:20am, and minutes from was set for 60 minutes. [1 hour], then the
employee would be punched out at 09:20am.
Note: The sequence of overtime is first check employee and if Yes then apply rules. Second
check Pay Class and if Yes apply all selected and if No apply nothing. Third apply On Call
for Weighted Average if selected.
4. Select Apply On Call Pay for Weighted Average Overtime to calculate weighted average
with On Call Pay included. See Advanced Labor/Rate Module for weighted average.
5. Select the Pay period type choice of Custom and Select the start date for the Pay period
with the number of days.
6. Click on the icon to display the Rounding Demo view to help understand rounding
rules.
7. Click on the Day Change tab.
10-8 – Advanced Pay Class Module
Time Guardian Series