Finishing Global Apply; Deleting Employees - Amano Time Guardian Series Installation And User Manual

Note: This global apply function will only be available when Web Interface module is activated.
From this window, the user can choose to apply Web Access settings by clicking on the box
next to the selection. If no checkmark is placed in the box, then the selection will not be applied
to the employee(s). In the example (figure above), the user is choosing to override the
employee's password with the specified setting and to grant the Punch, Previous Punch, and
Reset Password privilege to the employee(s). The Override setting for the password determines
if employees that already have a password are affected. If selected, then the password is
changed, but if not selected, then only the employees that do not have passwords are affected.
When the Global Apply Wizard is completed, all these settings will be applied to all the
employee(s) selected on the list.
Make the desired edits and click on the
Note: IMPORTANT!! Global Apply (assign) will only effect [override] the modules (i.e.,
Previous Punch) that have a checkmark in the "Access" column. Therefore, any module
where the Access column is not checked will not be changed (updated by Global Apply).

Finishing Global Apply

The final screen shows a list of the employee's that would be affected by the Global Apply
operation/selections and provides the user with the chance to Cancel the operation. Click on
the OK button perform the operation.

Deleting Employees

To delete an employee, highlight the desired employee record from the employee list in the
Table View and click on the
– Employee Administration
Time Guardian Series
button when finished.
button. You will be prompted to confirm your deletion.
5-15