For Amanonet Access Control Use - Amano Time Guardian Series Installation And User Manual

The AmanoNet tab will be active if you selected to integrate Access Control and selected
AmanoNet during the setup on the General tab from the Setup Wizard. When AmanoNet
Access Control software is connected to an AC or EC controller 4 tags are available, while 8
tags or 10 tags will appear when AmanoNet is connected to an EC2 controller (see the following
figure for an example with 4 Tags). Tag1 can be used to assign access levels, sites, and tag
options to the badge or tag number entered in the General tab. Tag2, thru Tag8 can be used to
add and configure additional tag(s) or badge(s) for the employee to use. Click on the
AmanoNet tab and the following type of screen will appear:

For AmanoNet Access Control use:

1. Enter PIN: The 5-digit number that an employee may have to enter at an access control
device.
2. Select the site from the dropdown list to assign relevant site number that the employee will
have access to.
3. Select employee type from the dropdown list choices of; Employee or Visitor.
4. Click on Tag 1 through Tag 4 and the following type of screen will appear:
– Access Control Module
Time Guardian Series
16-7