Amano Time Guardian Series Installation And User Manual page 211

3. Enter a name for the weekly OT template in the name field [required field].
4. Enter a description of the weekly OT template in the Description field.
5. Click on the Level tab.
6. Enter the threshold limits for each level of weekly overtime and assign a Pay Code to each
level of weekly overtime.
7. Click on the Count tab.
8. In the Count table, check the Pay Codes in each column that you want to be combined to
achieve each level's threshold. For example if you checked REG and HOL in the Level 1
column, then the hours for REG and HOL Pay Codes will be combined to reach Level 1's
threshold value.
Note: You can select all the Pay Codes in a given column by clicking on the column heading.
You can also deselect any checked Pay Codes in a column by clicking on the column
heading. To select all Pay Codes in the grid, click on the
also deselect all the Pay Codes in the grid, if all were selected.
– Advanced Overtime Module
Time Guardian Series
button. This button will
11-17