Chapter 2: Installation - Amano Time Guardian Series Installation And User Manual

There are five documents available to assist you in the setup and use of your Amano Time &
Attendance software: This Installation & User Guide, the FPT-40 Terminal/Time Guardian
Quick-Start Guide, the MTX-15 Terminal/Time Guardian Quick-Start Guide, the MTX-15
Installation & Operation Guide, and the FPT-40 Installation & Operation Guide. All these
documents can be accessed and printed from the Time & Attendance software CD. An
overview of the software installation steps is as follows:
Step 1. Insert the Time & Attendance CD
into your CD-ROM drive, and the
CD Menu will automatically launch.
Click on "Install" button to launch
InstallShield Wizard. If the installation
stalls, browse on CD to
\Disk1\InstData\Windows\VM\install.exe
Full integration with QuickBooks Pro
can require QuickBooks to be installed
on the host PC and open during installation .
Step 2. After the initial software installation, the
Amano Software Activation screen will
appear. Enter the 9-digit serial number
and click the Activate button. Upon
successful activation perform on-line
registration. Next the user will be prompted
to proceed through the 9-Step
Setup Wizard.
Step 3. Login to the Time &
Attendance software, and
perform daily activities
such as Timecard
Administration and
Payroll, etc. The software
by default will support 100
employees. If you have
more than 100
employees, contact
Amano Support to obtain
an incremental upgrade
from 125 to an unlimited
number of employees.
– Installation
Time Guardian Series

Chapter 2: Installation

2-1