Do You Want To Integrate Access Control? - Amano Time Guardian Series Installation And User Manual

10. Benefit Tracking Type only enabled when the Benefit Time module is activated
benefit type from the choices of none, Deaccruals, or Import Balances. Deaccruals or Import
Balances must be selected for the Benefit tab on the Employees screen to be active.
11. From the Company
appear:
12. Configure the E-mail settings by; entering the SMTP Host Name/IP Address [may have to
consult network administrator]. Select the Port to use for e-mail. Default setting = 25.
13. Click the box to select Requires Authentication if desired, and enter Username and
Password to be required. For added security click the box to select Requires SSL.
14. Enter the Default E-mail Contact which is the E-mail address to be used if none is setup in
the IM profile.
15. After completing the entry/selection of company information click on the Apply
save the company information and return to the Step 1: General Setup. Click on the Close
button to close the Company window without saving.
Note: The Apply and Close button function is universal for all Setup Wizard steps.
Do you want to integrate access control? [Module – requires activation to use]
From Step 1: General Setup press the Access Control button to define the company's access
control profile and the
3-6
screen, press the E-Mail Settings tab and the following screen will
Access Control screen will appear (see figure).
– Setup Wizard
Time Guardian Series
. Select the
button to