Amano Time Guardian Series Installation And User Manual page 191

8. Enter the time (in 24 hour format) that your business day ends in the Time field.
9. Enter the Maximum shift length or window of time (HH:MM) that will enable punches to be
grouped together for one shift. 12 to 13 hours is a recommended number for this field thus
allowing all lunch or break punches to be applied to the correct schedule.
10. Enter the number of punches allowed that cross the day change time to be calculated for the
schedule in the Maximum number of punches field. If 0 is entered, the Maximum shift length
will be used to override the Day Change Time.
11. If you are using both Maximum shift length and number of punches to override the Day
Change Time, you must select how punches will be applied to the schedule in the Shift
Requirement field. The choices are:
•
AND: The punches are brought back to the same shift until both the maximum number of
punches and maximum shift length conditions are satisfied.
•
OR: The punches are brought back to the same shift until either the maximum number of
punches or maximum shift length conditions are satisfied.
Example: Max Number of Punches/Max Shift Length relation with Shift Requirement
Max Shift Length is as follows:
Max Number of Punches = 4
Max Shift Length = Shown below.
If Shift Requirement is:
AND: Punches P1 through P6 qualify.
OR: Punches P1 through P4 qualify.
Max Number of Punches = 6
Max Shift Length = Shown below.
– Advanced Pay Class Module
Time Guardian Series
10-9