Amano Time Guardian Series Installation And User Manual page 209

3. Enter a name for the Period Overtime template in the name field [required field].
4. Enter a description of the Period Overtime template in the Description field.
5. Select Period Hours. The choices are; Current Calculated Day, or Previous Calculated Day
st
of the 1 In-Punch.
6. Enter the Period Length in HH:MM.
7. Enter the Time in HH:MM for period overtime.
8. Click on the check box if you wish the Period to start on the first In Punch only. If this setting
is not checked, a new period will be created for every IN punch. When multiple periods are
in effect, an employee can receive overtime for each period.
9. Click on the Settings tab, and the following type of screen will appear.
10. In the Level tab, select the day of the week that this overtime rule will apply to, using the
Day of the Week/Holiday(s) field. The choices are Sunday through Saturday, Default, or
Holiday Group. The Default setting will be used for any day(s) or Holiday(s) not defined
explicitly. Enter the threshold limits and assign a Pay Code to each level of overtime.
11. Click on the Count tab and the following window will appear:
12. On the Count table, check the Pay Codes in each column that you want to be combined to
achieve each level's threshold. For example, if you checked REG and HOL in the Level1
column, then the hours for REG and HOL Pay Codes will be combined to reach Level1's
threshold value.
– Advanced Overtime Module
Time Guardian Series
11-15