Amano Time Guardian Series Installation And User Manual page 76

The Ethernet and directly connected terminals in this location will appear in the Terminals
list (see figure).
12. Double-click on the found terminal or highlight the terminal and click on the Add button to
add a new HandPunch Terminal to the Location and the Terminal window will appear for
setup. If adding a new FPT-40 or MTX Terminal you must first search for the Terminal.
13. In the Name field, enter in a unique name [required field] that will be used to describe the
terminal. This field will be automatically populated with the MAC address when the eyeglass
button is used.
14. In the Number field, enter in a unique number for the terminal if allowed.
15. In the Serial No. field, a unique number will appear for a found MTX-15 terminal.
16. If you wish to assign a Bell Schedule to the terminal, select one from the dropdown list in the
Bells field.
3-52 – Setup Wizard
Time Guardian Series