Amano Time Guardian Series Installation And User Manual page 134

6. Placing a check in the Totals column will total each of the sorting criteria selected.
7. Placing a check in the Ascending column will list each of sorting criteria selected in
ascending order on the report. No check will list them in descending order.
8. Placing a check in the Show column will allow the selected sort criteria to appear in
the report.
9. The placement of the sort criteria in the report is accomplished by selecting a row
and using the up or down arrow buttons to move the row to the desired position.
23. Click on the Exception tab. See the following illustration for an example:
•
To add an Exception to the report, highlight the desired Exception in the Available list
and click on the Add button.
•
To add all Exceptions to the report, click on the Add All button.
•
To remove an Exception from the report, highlight the desired Exception in the Selected
list and click on the Remove button.
•
To remove all selected Exceptions, click on the Remove All button.
•
To define a Minute Requirement for a selected Exception, click on the Minute
Requirement field and enter a time in HH:MM format.
24. Click on the Pay Code tab. The Pay Code TT for triple time will appear if advanced module
is activated. See the following illustration for an example:
9-6 – Output
Time Guardian Series