Using Time & Attendance Software; Buttons; Chapter 3: Setup Wizard - Amano Time Guardian Series Installation And User Manual

It is recommended that you utilize the Quick-Start Guide and/or reference this Installation &
Operation Guide as you proceed through the Setup Wizard.
The Setup Wizard will help guide the user through a seamless step-by-step initial configuration
of the Time & Attendance software. As data is entered in each step the Setup Wizard can be
sequentially advanced to complete the next step. Once initial Setup Wizard is complete and the
Time & Attendance software is logged into, the Setup Wizard can be accessed from the Edit
menu at any time to modify the software configuration, i.e., add terminals and employees.
Using Time & Attendance Software

Buttons

The following buttons are common to all the modules in the Time & Attendance software:
Button Description
The following buttons are module specific and as such some buttons for Time Guardian and
Time Guardian Plus may not be active unless that module has been activated. However,
Time Guardian Pro comes standard with all modules.
Button Description
Run report.
Timecard.
Poll all terminals of the
selected locations.
Set the time for all terminals
at the selected locations.
Show schedule timeline.
– Setup Wizard
Time Guardian Series
Button
Close
Delete

Chapter 3: Setup Wizard

Description Button
Add
Edit
Button
Download validations and
settings to all terminals at the
selected locations.
View and communicate with
specific terminals of a specific
location.
Run payroll file.
Add employee certification.
Filter employee records.
Description
Save and exit
On-line Help
Description
3-1