Amano Time Guardian Series Installation And User Manual page 343

Type: Select one of the following options when source is set to:
• Value and Hour Multiplier: select either Hours, or Dollars.
• Change Rate: select Fix Value, Add To, or Percentage + Base.
• Set Zone Number: select either Set All, or Set in Window.
• Schedule: select either In Zone or All.
• Guaranteed Hours: select either Single Schedule or All Schedule.
Value: Enter in the amount of hours or dollars.
Pay Code Filter: Select either All or Selected. If selected is chosen, use the
button in the Pay Code Selection column to select the Pay Code hours to count towards the
Zone Award.
Assign Pay Code: Select either Single Pay Code, or Pay Code Mapping.
Labor Level Filter: Select either All or Selected. If selected is chosen, use the
button in the Labor Level Selection column to select the labor categories to count towards
the Zone Award.
Labor Award: Select either Labor working in, Home labor, or Fixed labor. If Fixed labor is
selected, use the
Labor Level that will be included in the Zone Award.
Zone Codes: Select the zone code to set the awarded hours to.
The following table displays the options for the Zone Award based on the Source selected:
– Zone Differential Module
Time Guardian Series
button in the Labor Award Selection column to select the
18-7