Nlm Setup Wizard; Using Nexus Lite Management (Nlm) Software - Amano Time Guardian Series Installation And User Manual

18. After the Nexus Lite Management Software has been installed, activated and registered, the
Setup Wizard Welcome screen will appear (see figure for example). See Setup Wizard for
detailed setup instructions.
Click on the Next
Management (NLM) Software and the Setup Wizard
Using the Setup Wizard).

NLM Setup Wizard

It is recommended that you utilize the NLM Quick-Start Guide and/or reference this Installation
& Operation section as you proceed through the Setup Wizard.
The Setup Wizard will help guide the user through a seamless step-by-step initial configuration
of the Nexus Lite Management (NLM) software. As data is entered in each step the Setup
Wizard can be sequentially advanced to complete the next step. Once initial Setup Wizard is
complete and the Nexus Lite Management (NLM) software is logged into, the Setup Wizard can
be accessed from the Edit menu at any time to modify the software configuration, i.e., add
terminals and employees.

Using Nexus Lite Management (NLM) Software

Using the NLM Setup Wizard
From the Setup Wizard "Steps Summary" screen click on the Next
Step 1. The Wizard Help will guide you through the Wizard Steps. The Setup Wizard has 4
Steps (see figure), however, as a minimum only
employee, and 1 user login defined. These steps will have
– Nexus Lite Module
Time Guardian Series
button to begin the Setup Wizard to configure the Nexus Lite
Steps Summary
Steps 2 and 4 are required with at least 1
Red X's alongside them.
screen will appear (see
button to continue with
23-7