General Setup Wizard - Amano Time Guardian Series Installation And User Manual

Amano recommends that you have the appropriate information before you begin the Setup
Wizard. Should you need to exit the Setup Wizard before completion, your settings will be
saved.
Once the Setup Wizard is finished, the Wizard Complete
point, all settings will be applied, including the time synchronization between the Time &
Attendance software PC and the connected terminals. Integration with Nexus220, and
AmanoNet 7.6 for Access control systems may require the activation of Access Control module
which is standard in Time Guardian Pro.
If the Wizard Complete button is not active, you must review your setup, verifying that all
mandatory fields (in red) have been completed. When all required fields are complete, the
Wizard Complete button will then be displayed.
Should you have any questions or require additional information, please email
TGSupport@Amano.com.
The following information will sequentially guide the user through the
See the remaining sections of this Time & Attendance software Installation & User Guide for
more additional functional descriptions especially sections describing the functionality of the
Advanced Modules.
Note: Time Guardian screens are used for illustrative purposes in the Setup Wizard. Some
advanced modules may have been activated to illustrate their setup features.
Step 1: General Setup Wizard
Define your Company profile:
From Step 1: General Setup press the Company button to define the company's profile and
the Company screen will appear. The Company profile consists of two tabs, General and
Settings. The General tab is used for the Company profile information, while the Settings tab is
used for the hours/time format and auto-poll on login.
3-4
[Optional Wizard Setup Step]
button will become active. At this
Setup Wizard
– Setup Wizard
Time Guardian Series
data entry.