Amano Time Guardian Series Installation And User Manual page 388

This filter is deeper as you can use the Employee tab to sort the employee list using;
Number, Badge, Payroll, Last Name, First Name, and Comment, and then apply the criteria.
To add an employee to the Terminal Validation, highlight the desired employee in the
Available list and click on the Add button. To select all, click on the Add All button.
To remove an employee from the Terminal Validation, highlight the desired employee in the
Selected list and click on the Remove button. To remove all, click on the Remove All
button.
Do you want to configure your terminals?
If Yes is selected, click the
Locations screen will appear (see figure). Answer Yes to this question if you are using Nexus
Lite terminals (Ethernet connection).
Before a Location can be created, a Terminal Validation must be set.
You must create a Location to communicate with your Nexus Lite terminals. A Location enables
the Nexus Lite Management (NLM) software to distinguish and interact with the desired
terminal(s). Only one terminal type can be used per Location. If you have more than one
terminal type, you must have multiple Locations.
The window will open on the General tab with a blank Location Name.
To create a new Location:
1. Create a new Location and enter a unique Name [yellow required field] that will be used to
describe the area or site where a terminal or group of terminals is located.
2. In the Description field, enter in a brief description of the Location.
3. The Term Type field is fixed as Nexus Lite for the type of terminal.
23-18
Location/Terminal button and the
– Nexus Lite Module
Time Guardian Series