Amano Time Guardian Series Installation And User Manual page 77

17. If you wish to assign a Terminal Validation setting to the terminal, select one from the
dropdown list in the Validation field.
18. Click on the Options tab. In the Buttons boxes, place a check in the Labor box to activate
the Labor button for a MTX-15 terminal. This box will be grayed out for FPT-40 terminal
because this function is not available at the terminal. Click in the Coffee, Break, and/or Meal
boxes to activate those functions at the terminals.
19. In the Time Format box, select the time format (12-hour or 24-hour) for the terminal (FPT-40,
MTX-15 and Hand Punches).
20. In the Misc boxes, select whether to enable the RR, Keypad, Repunch Protection, and/or
view hours for the MTX-15 terminal. The only function available at the FPT-40 is to View
Hours.
21. If you checked the Labor button click on the Labor Button tab and the following screen will
appear to setup labor transfer buttons with departments at the MTX-15 terminal:
22. If you set the Term Type to Hand Punch 1000, 2000, 3000, or 4000 in the General tab, the
HP Options tab will also be enabled. This allows you to reassign configuration parameters
for Hand Punch terminals. Click on the HP Options tab and the following screen will appear:
– Setup Wizard
Time Guardian Series
3-53