Range Overtime - Amano Time Guardian Series Installation And User Manual

8. In the Count table, check the Pay Codes in each column that you want to be combined to
achieve each level's threshold. For example if you checked REG and HOL in the Level1
column, then the hours for REG and HOL Pay Codes will be combined to reach Level1's
threshold value.
Note: You can select all the Pay Codes in a given column by clicking on the column heading.
You can also deselect any checked Pay Codes in a column by clicking on the column
heading. To select all Pay Codes in the grid, click on the
also deselect all the Pay Codes in the grid, if all were selected.
Note: If you wish to duplicate the Consecutive Overtime properties from the General,
Consecutive, and/or Count tabs, select the desired Consecutive Overtime template,
open it, enter in a new name and click on the Save As
Overtime template will appear in the Main View.

Range Overtime

Range Overtime awards overtime based on the qualifying number of hours in a given period (or
date range). A start and end date are required for each period. An unlimited number of "Ranges"
or periods can be setup in a given Range Overtime template, but they cannot overlap.
Creating a Range Overtime Template
1. Click on the Range Overtime node within the Pay Class module in the tree view (see the
following figure).
2. Click on the
11-20
button, and the Range Overtime window will appear:
– Advanced Overtime Module
Time Guardian Series
button. This button will
button. The new Consecutive