Table of Contents
Advertisement
601
Description
Selection
Default
Programming
54
4.8
Extension Programming
Class of Service
Programs each extension for a Class of Service (COS). The COS
determines the call handling abilities of an extension. Primary and
secondary COS numbers can be assigned per extension.
• Jack number : KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
(
= all jacks, -1 = first part, -2 = second part)
• COS number: 1 through 8
All jacks-1/2 – COS 1, COS 1
1.
Enter 601.
Display: COS Assign
2.
Press NEXT.
Display: Jack NO?→
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Display example: #01-1:COS1, COS1
• The Primary COS is blinking on the displays.
To change the Primary COS number, dial the number (1 - 8).
4.
Press
.
Display example: #01-1:COS1, COS1
• The Secondary COS is blinking on the displays.
To change the Secondary COS number, dial the number (1 - 8).
5.
Enter a COS number.
To change the current entry, enter the new number.
6.
Press STORE.
7.
To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
8.
Repeat steps 4 through 6.
9.
Press END.
(-1 / -2),
(-1 / -2),
Advertisement
Table of Contents
