Extension Group Assignment - Panasonic KX-TD308 Installation Manual

4 8 0
.
Description
Selection
Default
Programming
Conditions
Feature References
Extension Programming

Extension Group Assignment

Assigns each extension to an extension group. Extension groups
are used for Group Call Pickup, Station Hunting, and Paging -
Group.
Extension group number:
l
All jacks- l/2 - Extension group 1
1.
Enter 602.
Display: 602 EXT GROUP #
Press NEXT.
2.
Display: Jack NO?+
3. Enter a
To enter jack number 1, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack
number.
Display example: #l-1:EXGl
4. Enter the
To change the current entry, enter the new extension group number.
Press
6. To program another jack, press
SELECT
7. Repeat steps 4 through 6.
Press END.
There is a maximum of eight extension groups. Each extension can
l
only belong to one group.
For an explanation of jack numbering, see "Rotation of jack number"
l
on page 4-l.
To assign all jacks to one extension group, press the * key in step 3.
l
In this case, the display shows the contents programmed for Jack 1.
Section 3, Features
Call Pickup, Group
Extension Group
1 through 8, * (-1 / -2),
( * =a11 jacks, -1 = fist part, -2 = second part)
1 through 8
jack number.
extension group number.
STORE.
the jack number.
desired
Paging - Group
Station Hunting
System Programming
602
NEXT PREV,
or or
4-121