2.6 COS Programming
[517] Connected Line Identification Restriction
Description
Enables or disables the Connected Line Identification Restriction (COLR) Service.
Selection
• COS number: 1 through 8,
• Enable / Disable
Default
All COS – Disable.
Programming
1.
Enter 517.
Display: COLR
2.
Press NEXT.
Display: COS No?->
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1: Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all COS to one selection, press the
contents programmed for COS 1.
Feature References
Calling / Connected Line Identification Restriction (CLIR / COLR)
222
( =all COS)
key at step 3. In this case, the display shows the
General Programming