Account Code Entry - Panasonic KX-TD816AL User Manual

A

Account Code Entry

An Account Code is used to identify incoming and outgoing CO calls for
accounting and billing purposes. The account code is appended to the
"Station Message Detail Recording (SMDR)" call record. For incoming CO
calls, account codes are not required. For outgoing CO calls, account codes
are often required. You can enter account codes in the following three modes: Verified - All
Calls mode; Verified - Toll Restriction Override mode; and Option mode. One mode is
selected for each extension on a "Class of Service
Soft Button Operation
Entering account codes before dialing
1
2
S1 S2
3
account code and #
4
CO
Entering account codes during or after a conversation
1
S1 S2
2
account code and #
3-8
DPT Features
1. Lift the handset or press the SP-PHONE button.
2. Press the ACCNT (S3) button.
• You hear intermittent tone.
• The display shows:
ACCNT
S3
3. Enter the account code and #.
• You hear dial tone.
4. Press a CO button or dial the line access code (9 or 81 through 88)
and dial.
While having a conversation or hearing reorder tone after the other party
hangs up (within 15 seconds);
1. Press the ACCNT (S3) button.
ACCNT
• You can keep talking.
S3
2. Enter the account code and #.
3.2
" basis.
1
*
Enter ACCNT Code
DPT Features
2
*
TD816 TD1232
DPT (72**)
20 30 35 50