Service Error Code - Canon iR1600 Series Service Manual

CHAPTER 13 TROUBLESHOOTING
Error Transmission Report/Reception Results Report (for service)
A service error code and error dump lists may be attached to the error transmission re-
port or the reception results report.
To attach the lists, user service mode (SSSW-SW01). The following is an example of
attachment using an error transmission report:
2064 04/12 13:07 FAX
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]

[1] service error code

[2] START TIME (data and time; in 24-hr notation)
[3] OTHER PARTY (telephone number sent from the other party)
[4] MAKER CODE (manufacturer's code)
[5] MACHINE CODE (model-by-model code)
[6] nature of the V.8 signal received from the other party
[7] symbol speed used in the primary channel
[8] data speed used in the primary channel
[9] 0 (fixed)
13-174
COPYRIGHT© 2002 CANON INC.
**************************
*** ERROR RX REPORT ***
**************************
TX FUNCTION WAS NOT COMPLETED
TX/RX NO
RECIPIENT ADDRESS
DESTINATION ID
ST. TIME
TIME USE
PAGES SENT
RESULT
START TIME 04/12 13:07
OTHER PARTY
MAKER CODE 10001000
MACHINE CODE 01101110 00000000
RCV V.8 FRAME E0 81 85 D4 90 7E 00 00
SYMBOL RATE 3429
DATA RATE 28.8
TX LVL REDUCATION 0
ERR ABCODE 92
ERR SECTXB 8A
ERR SECRXB 80
Rx : (bit 1) 00000100 01110111 01010001 00100011 00000001 10101011 11000001 (bit56)
(bit57) 00000001 00000001 00000100 00000000 00000000
Tx : (bit 1) 00000000 01000000 00011111 00100010 00000000 00000000 00000000 (bit56)
Rx : NSF DIS CFR
Tx : NSS DCS PIX-288 PPS-EOP PPS-E0P PPS-E0P DCN
F13-506-09
0004
04/12 03:07
00`42
[1]
0
NG ##0765
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
001
(bit56)