3.4.6 The vertical path roller fails to rotate.
Main motor (M101)
1) Is 'E010' (fault in main motor) indicated?
YES: See the descriptions for 'E010' in 6.2.1.
Machine state
2) Is the pickup roller rotating?
YES: Check the vertical path roller drive assembly for damage/foreign
NO:
3.4.7 The registration roller fails to rotate.
Connector
1) Is the connection between the connector (J905) of the registration
NO:
Registration clutch
2) Try replacing the registration clutch. Is the problem corrected?
YES: Replace the registration clutch.
NO:
COPYRIGHT© 2002 CANON INC.
matter.
If damage is found, replace the gear. If foreign matter is found,
remove it.
See "Pickup operation fails" for the source of paper used.
clutch and the connector (J106) on the DC controller PCB nor-
mal?
Correct the connection.
Replace the DC controller PCB.
2000
CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
CHAPTER 13 TROUBLESHOOTING
13-45