Canon iR1600 Series Service Manual page 482

CHAPTER 13 TROUBLESHOOTING
#1 SSSW-SW18: remedies for communication faults (2)
Bit
Function
0 detection of carrier between DCS
and TCF
1 wait time for carrier between DCS
and TCF
2 not used
3 not used
4 not used
5 not used
6 not used
7 not used
[Bit 0]
For reception, the absence of the carrier between DCS and TCF may be detected. If the
machine returns FTT while the other party (PC-FAX in particular) is sending TCF to
cause a reception error, be sure to set the bit to '1'. If the error still occurs, set bit 1 of #1
SSSW SW18 to '1'. This function is valid only when the machine uses an R288F modem.
[Bit 1]
For reception, the length of time during which the absence of the carrier is detected be-
tween DCS and TCF may be set. This bit is valid when '1' is set to bit 0 of #1 SSSW
SW18.
13-104
COPYRIGHT© 2002 CANON INC.
1 0
detect do not detect
600msec 300msec
- -
- -
- -
- -
- -
- -
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
Factory setting
0
0