7) Lift the CS unit [10] from the carriage
[9] to free the lock [11] of the connec-
tor; then, detach the flexible cable
[12], and detach the CS unit [10].
Do not loosen or remove the 3
screws [2] found on the rail
guide [1]. They are adjusted to
high accuracy at the factory.
After mounting the CS unit, do
not turn on the power switch
while the CS unit is at the left
edge. Otherwise, the machine
will not be able to detect home
position normally, causing the
reader motor to go out of sync.
COPYRIGHT© 2002 CANON INC.
CHAPTER 3 IMAGE READING/PROCESSING SYSTEM
2000
CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
[12]
[11]
F03-502-06
[1]
[2]
F03-502-07
[11]
[10]
[9]
[2]
3-25