Canon iR1600 Series Service Manual page 344

CHAPTER 11 INSTALLATION
3) Cut the dummy cover area [5] of the
right front support with nippers.
4) Connect the connector [7] of the har-
ness [6] that comes with the unit to J10/
J210 of the image processor PCB.
5) Route the harness [6] as indicated, and
lead it through the opening [8].
11-30
COPYRIGHT© 2002 CANON INC.
[7]
[6]
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
[5]
F11-502-03
F11-502-04
[8]