Canon iR1600 Series Service Manual page 485

#1 SSSW-SW25: report display function settings
Bit
Function
0 Transmission telephone numbers
displayed on reports from CSI
1 not used
2 not used
3 Menu display of message language
4 not used
5 not used
6 not used
7 not used
[Bit 0]
Selects the transmission telephone number displayed on reports after the completion of
transmission.
When "Called number" is selected, the telephone number the fax called is displayed on
reports.
When "Other fax number" is selected, the telephone number sent from the other fax (the
CSI signal data) is displayed on reports.
[Bit 3]
When "Display" is selected, adds a Message Language menu to the user data "System
Setting". This allows selecting different languages which to show displays and reports.
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
CHAPTER 13 TROUBLESHOOTING
1 0
Other fax Called
number number
- -
- -
Display Do not
display
- -
- -
- -
- -
Factory setting
0
0
13-107