Pickup Operation Fails - Canon iR1600 Series Service Manual

CHAPTER 13 TROUBLESHOOTING
3.4.3 Pickup operation fails. (cassette)
Main motor (M101)
1) Is 'E010' (fault in main motor) indicated?
YES: See the descriptions for 'E010' in 6.2.1.
Machine state
2) Is the pickup roller rotating?
NO:
Paper
3) Is the cassette fitted correctly?
NO:
Pickup roller
4) Is there wear or cracking in the surface of the pickup roller?
YES: Replace the pickup roller.
Pickup drive assembly gear
5) Is there damage/foreign matter on the gear of the pickup roller
YES: If damage is found, replace the gear. If foreign matter is found,
Cassette pickup solenoid (SL: 151)
6) Are the connection and the wiring between the connector (J906) of
NO:
Cassette pickup solenoid, DC controller PCB
7) Does the cassette pickup solenoid operating normally?
NO:
Cassette controller PCB (if 2-cassette type)
8) Try replacing the cassette controller PCB. Is the fault corrected?
YES: End.
DC controller PCB, Image processor PCB
9) Try replacing the DC controller PCB. Is the fault corrected?
YES: Replace the DC controller PCB.
NO:
13-42
COPYRIGHT© 2002 CANON INC.
Go to step 6.
Replace the cassette.
drive assembly?
remove it.
the cassette pickup sensor and the connector (J106) on the DC
controller PCB normal?
Correct the connection or the wiring.
Replace the cassette pickup solenoid.
Replace the image processor PCB.
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002