Canon iR1600 Series Service Manual page 373

5. Multifeeder Pickup Roller
1) Open the manual feed tray, and remove the left cover.
2) Open the front cover, and release the developing assembly lever; then, detach the drum
unit.
3) Remove the multifeeder tray and the pickup guide (2 screws); then, detach the
multifeeder pickup roller.
4) Clean the roller with lint-free paper. If the dirt is excessive, use alcohol.
6. Multifeeder Separation Pad
1) Open the multifeeder tray, and detach the left cover.
2) Open the front cover, and release the developing assembly lever; then, detach the drum
unit.
3) Remove the multifeeder tray and the pickup guide (2 screws); then, clean the
multifeeder serration pad with lint-free paper.
7. Registration Roller
1) Open the multifeeder tray, and detach the left cover.
2) Open the front cover, and release the developing assembly lever; then, detach the drum
unit.
3) Remove the multifeeder tray and the pickup guide (2 screw); then, clean the roller with
lint-free paper while turning it by hand. If the dirt is excessive, use alcohol.
8. Transfer Charging Roller
1) Open the multifeeder tray, and detach the left cover. While taking care not to touch the
roller, turn the roller by hand while lightly wiping it with lint-free paper (not leaving pa-
per lint).
Do not touch the roller. Or, do not use water or solvent to clean the roller.
9. Static Eliminator
1) Open the multifeeder tray, and detach the left cover. Clean the static eliminator of the
transfer charging roller and the static eliminator of the pickup guide assembly with a
blower brush or lint-free paper.
COPYRIGHT© 2002 CANON INC.
CHAPTER 12 MAINTENANCE AND INSPECTION
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
12-5