Canon iR1600 Series Service Manual page 271

[1] Control panel lower cover (3 screws)
[2] Left cover
[3] Front cover (1 L-shaped pin and 1 screw)
[4] Delivery tray (2 screws)*
[5] Right cover (5 screws)
[6] Right support cover (2 screws)*
[7] Right rear cover (1 screw)
[8] Right upper cover (5 screws)
[9] Left front cover (2 screws)
[10] Delivery upper cover
[11] Delivery rear cover (4 screws)*
[12] Left upper cover (4 screws)
[13] Left rear over (3 screws)
[14] Rear cover (7 screws; however, 13 screws if printer board is mounted)
[15] Rear upper cover (3 screws)*
[16] Multifeeder tray
*Must be removed in specific sequence.
Remove the external covers in the following sequence:
Target cover
[4] Delivery tray ← [5] Right cover ← [10] Delivery upper cover ← [9] Left front cover
[6] Right support cover ← [5] Right cover
[11] Delivery right cover ← [4] Delivery tray ← [2] Right cover
← [10] Delivery upper cover ← [9] Left front cover
[13] Left rear cover ← [16] Multifeeder tray
[15] Rear upper cover ← [14] Rear cover ← [12] Left upper cover ← [8] Right upper
cover ← ADF or copyboard cover
COPYRIGHT© 2002 CANON INC.
CHAPTER 8 EXTERNALS AND AUXILIARY CONTROL SYSTEM
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
Cover to remove
8-21