Canon iR1600 Series Service Manual page 346

CHAPTER 11 INSTALLATION
8) Mount the removed right cover, rear
cover, and right rear cover. (At this
time, do not tighten the screw at [13].)
When mounting the right cover,
take care so that the connector
of the harness will not be inside
the machine.
9) Connect the connector [11] of the
routed harness and the connector [14] of
the card reader.
10) Remove the short connector [15].
Be sure to remove the shorting
connector [15]; otherwise, an
operation fault or error can oc-
cur.
11) Mount the card reader [17] in place us-
ing a washer [16] and a screw [13].
11-32
COPYRIGHT© 2002 CANON INC.
[11]
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
[15]
[14]
[17]
F11-502-07
[16]
[13]