CHAPTER 11 INSTALLATION
7.3 Installation to the Copier
Keep the following in mind when installing the RDD to the copier:
1. This accessory is to be installed by a qualified personal.
2. Make sure the copier has been properly installed before starting the
work.
3. Keep the copier's power cord disconnected during the work.
4. Be sure to use the appropriate screws (length, diameter).
5. Make sure the computer in the service station has been properly loaded
with the RDD's settings data.
A. Installation
1) Remove the two screws [1] to detach
the RDD's top cover [2].
2) Remove the four screws [2], and de-
tach the face cover [1] from the
copier's rear cover.
11-40
COPYRIGHT© 2002 CANON INC.
[1]
[2]
2000
CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
[2]
F11-703-01
[1]
F11-703-02
[1]