d. High Temperature Error
•
The reading of the main thermistor is 220°C or higher.
e. Drive Circuit Error
•
At time of initialization, the ZEROXI* signal of the power supply cannot be detected.
•
The ZEROXI* signal does not arrive for 3 sec during temperature control.
•
A triac short is detected (ASIC).
COPYRIGHT© 2002 CANON INC.
2000
CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
CHAPTER 7 FIXING SYSTEM
7 - 9