Developing Assembly - Canon iR1600 Series Service Manual

CHAPTER 5 IMAGE FORMATION SYSTEM

7.2 Developing Assembly

7.2.1 Removing the Developing Assembly
1) Remove the left cover.
2) Open the front cover, and shift down
the developing assembly locking lever
[1]. While pushing on the protrusion of
the toner cartridge, turn the grip fully
clockwise, and pull out the toner car-
tridge [2].
3) Turn the developing assembly locking
lever [3] clock wise to unlock.
4) Take out the drum unit (7.1.1 in Chap-
ter 5)
5) Remove the multifeeder tray. (5.2.1 in
Chapter 6)
6) Remove the two screws [4], and detach
the shaft guide [5].
7) Holding the grips [6], slowly pull out
the developing assembly [7].
5-18
COPYRIGHT© 2002 CANON INC.
[3]
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
1
2
[2] [1]
F05-702-01
[5]
F05-702-02
[7]
[6]
F05-702-03
[4]