Canon iR1600 Series Service Manual page 279

7) Disconnect the connector [9], and re-
move the 3 screws [10].
8) Remove the printer board. (if equipped
with printer functions; see to 6.5.11 in
Chapter8)
9) If the mounting screw [12] of the analog
processor PCB [11] is hidden behind
the humidity preventing plate [13], per-
form the following:
If the screw [12] is not hidden, go to
step 12).
COPYRIGHT© 2002 CANON INC.
CHAPTER 8 EXTERNALS AND AUXILIARY CONTROL SYSTEM
2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
[9]
F08-605-08
[12] [11] [12]
F08-605-09
[10]
[13]
8-29