Disassembly And Assembly - Canon iR1600 Series Service Manual

1 Disassembly and Assembly

Here, instructions on how to disassemble/assemble the machine are given together with
explanations of its mechanical characteristics; be sure to keep the following in mind when
going through the work:
1. Before starting the work, be sure to disconnect the power plug.
2. Unless otherwise specially indicated, reverse the steps used to disassemble the ma-
chine when assembling it.
3. Identify the screws by types (length, diameter) and location.
4. To ensure electrical continuity, the mounting screws used for the grounding wire and
arrestors are equipped with toothed washers. Do not leave them out when assembling
the machine.
5. As a rule, do not operate the machine with any of its parts removed.
6. Be sure to use SHUT DOWN MENU to shut down the printer if the Hard Disk HD-65
(accessory) has been installed.
COPYRIGHT © 2002 CANON INC. 2001 2001 2001 2001 CANON Printer Board-N1/iN-E5 REV.0 MAR. 2002
CHAPTER 3 DISASSEMBLY/ASSEMBLY
3 - 1