Canon iR1600 Series Service Manual page 723

1 Service Mode
1.1 Outline
You can use the host machine's service mode to make printer-related service mode set-
tings as follows:
Making Settings
The keys to use on the control panel vary depending on the host model (whether or not
equipped with a fax function). The indications within parentheses refer to the control
panel keys of a host model equipped with a fax function.
1) Press the Additional Functions key and then the ID (#) key in the control panel to start
service mode.
2) Using the cursor key, select #8 PDL (printer-related service mode).
3) Using the cursor key, select PDL-PCL MENU, and press the OK key.
4) Using the cursor key, select MENU, and press the OK key.
If you have selected SERVICE MENU, go through the following:
5) If the fax function model, press the printer key to enter the printer mode.
6) Using the MENU (F1) key, select the desired menu.
7) Using the ITEM (F2) key, select the desired item.
8) Using the VALUE (F3) key, select the desired setting.
9) Press the ENTER (F4) key to store the setting.
10) Press the Go (OK) key to end service mode.
COPYRIGHT © 2002 CANON INC. 2001 2001 2001 2001 CANON Printer Board-N1/iN-E5 REV.0 MAR. 2002
CHAPTER 4 TROUBLESHOOTING
4 - 1