Canon iR1600 Series Service Manual page 245

9) Using lint-free paper or the like, hold
the fixing roller [15] avoiding direct
contact; then, check to make sure that
the strip [16] will not fall when the fix-
ing roller is held as shown.
The delivery roll [17] and the
spring [18] tend to come off
easily once the delivery lower
cover has been removed. Take
full care not to lose it.
10) While holding the fixing roller, remove
the paper.
11) After mounting the fixing roller and
the fixing heater, check to make sure
the thermal switch [19] are correctly
mounted by lightly pushing and then
releasing the fixing aluminum core
[20].
12) Hereafter, put back the fixing assembly
by reversing the steps.
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
CHAPTER 7 FIXING SYSTEM
[18]
[17]
[15]
F07-306-08
[19] [20]
F07-306-09
[16]
7-27